Shoe cleaning

Neptun II

The NeptunII boot-washing unit is similar to the Neptun I sole cleaning unit, but is also equipped with two nylon brushes, which are placed at both sides. These wheel brushes, which are also sprayed with water and cleaning medium, clean the bootlegs effortlessly and quickly.

These brushes are hard brushes to ensure the dirt is scrape off completely. Suitable for removing sticky things, eg. dough, hard soil. Perfect for bakery, mining industry, or food manufacturer.

Fully automatic with contact switches on the handle so that there is no contact with the boots, brushes, floor so you reduce cross contamination risk.  

You can adjust the concentration of the sanitizer / detergent to ensure the optimum amount is applied without overdosing 

Energy efficient and environmentally friendly. Power consumption is 0.75KW meaning it takes 750 KW/hour  which is about the same as hair dryer on lowest setting.

It takes 6 litres fresh water / minute if the button is pushed all the time, as soon as the button is released, it stops.

It has completely capsuled steering (control unit) which means it can be positioned outside of the premises the whole year round. 

Case:
stainless steel design

Water consumption:
approx. 6 liters per minute

Dimension:
112 cm x 95 cm x 131 cm
length x depth x height

Feeding pump:
adjustable from approx.
0.01 to 0.5 l/min

Weight:
138 kg net, 150 kg gross

Contact switch:
on the handle

Power supply:
400 volt, 16 A,
other voltages optionally,
three-phase current

main Boot cleaning unit Neptun II
steel
completely out of
stainless steel
download