Shoe cleaning
 
Easy
cleaning 
Active
cleaning Soltec II + III „wet“ and „dry“
Soltec cleaning units for heavy duty use in industrial environments are available in two different lengths. These devices are designed for above ground placement and should be positioned in a way that everyone will have to pass through this unit.
Our Soltec “dry” version brushes dirt off shoe soles and collects it in a large stainless steel drawer at the bottom of the machine, which can be removed for easy cleaning. <b/Soltec “wet” models have an ¾" input connector to feed water by means of a solenoid valve on the two wheel brushes while optional cleaning medium can be added with the integrated hose pump. Sewage flows off through an 2,5" diameter nozzle. The grates above the brushes can be lifted for cleaning the inside of the machine. Each unit has an ptical sensor on both sides, which starts the drive. The follow-up time can be regulated so that the unit will be cleaned sufficiently after usage. Drive transmission: 2 x worm gear drive
RPM of the brushes: approx. 93 RPM Case and handrail: made entirely from stainless steel Dimension Soltec II: 940 x 1.900 x 1.270mm (W x L x H) Dimension Soltec III: 940 x 2.670 x 1.270mm (W x L x H) Brushes Soltec II: 2 à 1.000mm length, PA 6.12, 1 mm black, hard Brushes Soltec III: 2 à 1.600mm length, PA 6.12, 1 mm black, hard Weight:
Soltec II “dry”: 270kg net Soltec III “dry”: 305kg net Soltec II “wet”: 265kg net Soltec III “wet”: 300kg net Start/Stop automatism: via 2 optical sensors Power supply: 3 x 400 volt/N/PE, nominal current max 3,75A Motor: 0,5kw, 50-60Hz, IP 64 Specifics of model “wet” Water inlet connection R ¾", internal thread + solenoid valve Water outlet connection R 2½" external thread Water pressure min. 4bar, max. 8bar Water temperature min. 4°C, max. 42°C Holder for max. 20 l cleaning medium tank Soltec III, „dry“ |